Tap drill and clearance hole chart
The drill to use before tapping, and the hole to drill for a screw to pass through, for metric threads M2 to M36 and inch threads #2 to 1/2". Pick a thread for its diameters, head sizes and the closest drill bits in other systems.
Metric coarse threads
| Thread | Pitch | Tap drill 75% | Tap drill 50% | Clearance close | Clearance normal | Clearance loose |
|---|---|---|---|---|---|---|
| M2 × 0.4 | 0.4 mm | 1.6 mm | 1.8 mm | 2.2 mm | 2.4 mm | 2.6 mm |
| M2.5 × 0.45 | 0.45 mm | 2.05 mm | 2.3 mm | 2.7 mm | 2.9 mm | 3.1 mm |
| M3 × 0.5 | 0.5 mm | 2.5 mm | 2.75 mm | 3.2 mm | 3.4 mm | 3.6 mm |
| M4 × 0.7 | 0.7 mm | 3.3 mm | 3.7 mm | 4.3 mm | 4.5 mm | 4.8 mm |
| M5 × 0.8 | 0.8 mm | 4.2 mm | 4.6 mm | 5.3 mm | 5.5 mm | 5.8 mm |
| M6 × 1.0 | 1.0 mm | 5.0 mm | 5.5 mm | 6.4 mm | 6.6 mm | 7.0 mm |
| M8 × 1.25 | 1.25 mm | 6.8 mm | 7.4 mm | 8.4 mm | 9.0 mm | 10.0 mm |
| M10 × 1.5 | 1.5 mm | 8.5 mm | 9.25 mm | 10.5 mm | 11.0 mm | 12.0 mm |
| M12 × 1.75 | 1.75 mm | 10.2 mm | 11.0 mm | 13.0 mm | 14.0 mm | 15.0 mm |
| M14 × 2.0 | 2.0 mm | 12.0 mm | 13.0 mm | 15.0 mm | 15.5 mm | 17.0 mm |
| M16 × 2.0 | 2.0 mm | 14.0 mm | 15.0 mm | 17.0 mm | 18.0 mm | 19.0 mm |
| M18 × 2.5 | 2.5 mm | 15.5 mm | 16.75 mm | 19.0 mm | 20.0 mm | 21.0 mm |
| M20 × 2.5 | 2.5 mm | 17.5 mm | 18.75 mm | 21.0 mm | 22.0 mm | 24.0 mm |
| M22 × 2.5 | 2.5 mm | 19.5 mm | 20.75 mm | 23.0 mm | 24.0 mm | 26.0 mm |
| M24 × 3.0 | 3.0 mm | 21.0 mm | 22.5 mm | 25.0 mm | 26.0 mm | 28.0 mm |
| M27 × 3.0 | 3.0 mm | 24.0 mm | 25.5 mm | 28.0 mm | 30.0 mm | 32.0 mm |
| M30 × 3.5 | 3.5 mm | 26.5 mm | 28.25 mm | 31.0 mm | 33.0 mm | 35.0 mm |
| M33 × 3.5 | 3.5 mm | 29.5 mm | 31.25 mm | 34.0 mm | 36.0 mm | 38.0 mm |
| M36 × 4.0 | 4.0 mm | 32.0 mm | 34.0 mm | 37.0 mm | 39.0 mm | 42.0 mm |
Metric fine threads
| Thread | Pitch | Tap drill 75% | Tap drill 50% | Clearance close | Clearance normal | Clearance loose |
|---|---|---|---|---|---|---|
| M6 × 0.75 | 0.75 mm | 5.25 mm | 5.6 mm | 6.4 mm | 6.6 mm | 7.0 mm |
| M8 × 1.0 | 1.0 mm | 7.0 mm | 7.5 mm | 8.4 mm | 9.0 mm | 10.0 mm |
| M10 × 1.25 | 1.25 mm | 8.8 mm | 9.4 mm | 10.5 mm | 11.0 mm | 12.0 mm |
| M10 × 1.0 | 1.0 mm | 9.0 mm | 9.5 mm | 10.5 mm | 11.0 mm | 12.0 mm |
| M12 × 1.5 | 1.5 mm | 10.5 mm | 11.25 mm | 13.0 mm | 14.0 mm | 15.0 mm |
| M12 × 1.25 | 1.25 mm | 10.8 mm | 11.4 mm | 13.0 mm | 14.0 mm | 15.0 mm |
| M14 × 1.5 | 1.5 mm | 12.5 mm | 13.25 mm | 15.0 mm | 15.5 mm | 17.0 mm |
| M16 × 1.5 | 1.5 mm | 14.5 mm | 15.25 mm | 17.0 mm | 18.0 mm | 19.0 mm |
| M18 × 2.0 | 2.0 mm | 16.0 mm | 17.0 mm | 19.0 mm | 20.0 mm | 21.0 mm |
| M20 × 2.0 | 2.0 mm | 18.0 mm | 19.0 mm | 21.0 mm | 22.0 mm | 24.0 mm |
| M22 × 2.0 | 2.0 mm | 20.0 mm | 21.0 mm | 23.0 mm | 24.0 mm | 26.0 mm |
| M24 × 2.0 | 2.0 mm | 22.0 mm | 23.0 mm | 25.0 mm | 26.0 mm | 28.0 mm |
| M27 × 2.0 | 2.0 mm | 25.0 mm | 26.0 mm | 28.0 mm | 30.0 mm | 32.0 mm |
| M30 × 2.0 | 2.0 mm | 28.0 mm | 29.0 mm | 31.0 mm | 33.0 mm | 35.0 mm |
| M33 × 2.0 | 2.0 mm | 31.0 mm | 32.0 mm | 34.0 mm | 36.0 mm | 38.0 mm |
| M36 × 3.0 | 3.0 mm | 33.0 mm | 34.5 mm | 37.0 mm | 39.0 mm | 42.0 mm |
Inch coarse threads (UNC)
| Thread | Pitch | Tap drill 75% | Tap drill 50% | Clearance close | Clearance normal | Clearance loose |
|---|---|---|---|---|---|---|
| #2-56 UNC | 56 TPI | #50 | #47 | #43 | #41 | #37 |
| #4-40 UNC | 40 TPI | #43 | #39 | #31 | #30 | #28 |
| #6-32 UNC | 32 TPI | #36 | #31 | #27 | #24 | #20 |
| #8-32 UNC | 32 TPI | #29 | #25 | #17 | #14 | #9 |
| #10-24 UNC | 24 TPI | #25 | #18 | #7 | #4 | 7/32" |
| #12-24 UNC | 24 TPI | #16 | #9 | #1 | letter B | letter E |
| 1/4"-20 UNC | 20 TPI | #7 | #1 | letter H | letter J | letter L |
| 5/16"-18 UNC | 18 TPI | letter F | letter L | letter Q | letter S | 23/64" |
| 3/8"-16 UNC | 16 TPI | 5/16" | letter S | letter X | 27/64" | 7/16" |
| 7/16"-14 UNC | 14 TPI | letter U | letter Y | 15/32" | 31/64" | 33/64" |
| 1/2"-13 UNC | 13 TPI | 27/64" | 29/64" | 17/32" | 35/64" | 37/64" |
Inch fine threads (UNF)
| Thread | Pitch | Tap drill 75% | Tap drill 50% | Clearance close | Clearance normal | Clearance loose |
|---|---|---|---|---|---|---|
| #2-64 UNF | 64 TPI | #49 | #47 | #43 | #41 | #37 |
| #4-48 UNF | 48 TPI | #42 | #38 | #31 | #30 | #28 |
| #6-40 UNF | 40 TPI | #33 | #30 | #27 | #24 | #20 |
| #8-36 UNF | 36 TPI | #29 | #24 | #17 | #14 | #9 |
| #10-32 UNF | 32 TPI | #21 | #16 | #7 | #4 | 7/32" |
| #12-28 UNF | 28 TPI | #14 | #8 | #1 | letter B | letter E |
| 1/4"-28 UNF | 28 TPI | #3 | letter A | letter H | letter J | letter L |
| 5/16"-24 UNF | 24 TPI | letter I | letter L | letter Q | letter S | 23/64" |
| 3/8"-24 UNF | 24 TPI | letter Q | letter T | letter X | 27/64" | 7/16" |
| 7/16"-20 UNF | 20 TPI | 25/64" | letter Z | 15/32" | 31/64" | 33/64" |
| 1/2"-20 UNF | 20 TPI | 29/64" | 15/32" | 17/32" | 35/64" | 37/64" |
Questions
- How do I work out a tap drill size?
- For metric threads, subtract the pitch from the major diameter. M6 × 1.0 gives 6 − 1 = 5, so the tap drill is 5.0 mm. That lands close to 75% thread, the usual choice.
- What is the difference between 75% and 50% thread?
- It is how much of the full thread depth the tap cuts. 75% is standard. 50% uses a larger drill, so the tap cuts less metal: easier work in hard or tough material, with fewer broken taps.
- What is the difference between a tap drill and a clearance hole?
- A tap drill is smaller than the screw, leaving metal for the tap to cut threads into. A clearance hole is larger, so the screw passes straight through. For 1/4"-20 that is a #7 tap drill and a letter J drill for normal clearance.
- Should I use a close, normal or loose clearance hole?
- Normal suits general assembly. Use close when the hole has to locate the part accurately. Use loose when several fasteners share a part, or the holes may not line up exactly.
This chart, offline at the bench.
Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts