Skip to content

#8-32 UNC tap drill size and clearance hole

To tap #8-32 UNC, drill #29 (3.454 mm) for 75% thread. For a screw to pass through, drill a #14 (4.623 mm) clearance hole. #8-32 UNC is a unified coarse thread (UNC) with a 4.166 mm (0.1640 in) major diameter and a 0.794 mm pitch (32 threads per inch).

Tap drill, 75% thread
#29
3.454 mm
Clearance hole, normal fit
#14
4.623 mm
Threads per inch
32
0.794 mm pitch
Major diameter
4.166 mm
0.1640 in

Tap drill sizes for #8-32 UNC

Tap drill sizes for #8-32 UNC
Thread engagementDrillDiameter (mm)Diameter (in)Use it for
75% thread#293.454 mm0.1360 inThe usual choice for most materials
50% thread#253.797 mm0.1495 inHard or tough materials: easier tapping, fewer broken taps

No #29 bit to hand? The closest standard bits to 3.454 mm are 3.5 mm (metric) and 9/64" (3.572 mm, fractional inch). A slightly larger bit cuts a shallower thread; a smaller one makes the tap work harder.

Clearance holes for #8 screws

Clearance hole sizes for #8 screws
FitDrillDiameter (mm)Diameter (in)Use it for
Close#174.394 mm0.1730 inAccurate location, well-aligned holes
Normal#144.623 mm0.1820 inGeneral assembly
Loose#94.978 mm0.1960 inSeveral fasteners, or holes that may not line up

#8-32 UNC thread dimensions

#8-32 UNC thread dimensions
DimensionValue
Thread seriesUnified coarse thread (UNC)
Major diameter4.166 mm (0.1640 in)
Pitch diameter3.65 mm (0.1437 in)
Minor diameter3.193 mm (0.1257 in)
Pitch0.794 mm (0.0313 in)
Threads per inch32

Head sizes for #8 screws and bolts

Head dimensions for #8 screws and bolts
Head typeHead diameterHead heightAcross flatsDriveStandard
Socket Head Cap Screw6.86 mm4.17 mmn/ahex socket 9/64"ASME B18.3
Hex Head Boltn/a3.3 mm8.73 mmexternal hex 11/32"ASME B18.2.1
Pan Head Screw8.18 mm2.92 mmn/aPhillips PH2ASME B18.6.3
Flat Countersunk Head Screw8.43 mm2.82 mmn/aPhillips PH2ASME B18.6.3 (82 deg)

Questions

What size drill bit do I use for a #8-32 UNC tap?
Use a #29 (3.454 mm) drill for 75% thread, the usual choice. In hard or tough material, a #25 (3.797 mm) drill gives 50% thread and taps more easily.
What is the clearance hole for a #8 screw?
Drill #14 (4.623 mm) for a normal fit. Use #17 (4.394 mm) for a close fit, or #9 (4.978 mm) for a loose fit that forgives misaligned holes.
How many threads per inch does #8-32 UNC have?
32 threads per inch, which is a pitch of 0.794 mm. It is the coarse (UNC) thread for #8; the fine thread is #8-36 UNF.
What size spanner and hex key fit a #8 bolt?
A #8 hex head bolt takes a 11/32" spanner or socket. A #8 socket head cap screw takes a 9/64" hex key.

Every thread on this site, in your pocket.

Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts

Get Nuts & Bolts on Google Play