M33 × 2.0 tap drill size and clearance hole
To tap M33 × 2.0, drill 31.0 mm (1.2205 in) for 75% thread. For a screw to pass through, drill a 36.0 mm (1.4173 in) clearance hole. M33 × 2.0 is an ISO metric fine thread with a 33.0 mm major diameter and a 2.0 mm pitch.
- Tap drill, 75% thread
- 31.0 mm
- 1.2205 in
- Clearance hole, normal fit
- 36.0 mm
- 1.4173 in
- Pitch
- 2.0 mm
- fine pitch
- Major diameter
- 33.0 mm
- 1.2992 in
Tap drill sizes for M33 × 2.0
| Thread engagement | Drill | Diameter (in) | Use it for |
|---|---|---|---|
| 75% thread | 31.0 mm | 1.2205 in | The usual choice for most materials |
| 50% thread | 32.0 mm | 1.2598 in | Hard or tough materials: easier tapping, fewer broken taps |
Clearance holes for M33 screws
| Fit | Drill | Diameter (in) | Use it for |
|---|---|---|---|
| Close | 34.0 mm | 1.3386 in | Accurate location, well-aligned holes |
| Normal | 36.0 mm | 1.4173 in | General assembly |
| Loose | 38.0 mm | 1.4961 in | Several fasteners, or holes that may not line up |
M33 × 2.0 thread dimensions
| Dimension | Value |
|---|---|
| Thread series | ISO metric fine thread |
| Major diameter | 33.0 mm |
| Pitch diameter | 31.701 mm |
| Minor diameter | 30.546 mm |
| Pitch | 2.0 mm |
Head sizes for M33 screws and bolts
| Head type | Head diameter | Head height | Across flats | Drive | Standard |
|---|---|---|---|---|---|
| Socket Head Cap Screw | 50.0 mm | 33.0 mm | n/a | hex socket 24.0 | DIN 912, ISO 4762 |
| Hex Head Bolt | n/a | 21.0 mm | 50.0 mm | external hex 50 | DIN 933, ISO 4017 (full thread), DIN 931, ISO 4014 (partial thread) |
Questions
- What size drill bit do I use for an M33 × 2.0 tap?
- Use a 31.0 mm (1.2205 in) drill for 75% thread, the usual choice. In hard or tough material, a 32.0 mm (1.2598 in) drill gives 50% thread and taps more easily.
- What is the clearance hole for an M33 screw?
- Drill 36.0 mm (1.4173 in) for a normal fit. Use 34.0 mm (1.3386 in) for a close fit, or 38.0 mm (1.4961 in) for a loose fit that forgives misaligned holes.
- What is the pitch of M33 × 2.0?
- M33 × 2.0 has a 2.0 mm pitch, measured from one thread crest to the next. It is the fine pitch for M33; the coarse pitch is M33 × 3.5.
- What size spanner and hex key fit an M33 bolt?
- An M33 hex head bolt takes a 50 mm spanner or socket. An M33 socket head cap screw takes a 24.0 mm hex key.
Every thread on this site, in your pocket.
Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts