Skip to content

#2-64 UNF tap drill size and clearance hole

To tap #2-64 UNF, drill #49 (1.854 mm) for 75% thread. For a screw to pass through, drill a #41 (2.438 mm) clearance hole. #2-64 UNF is a unified fine thread (UNF) with a 2.184 mm (0.0860 in) major diameter and a 0.397 mm pitch (64 threads per inch).

Tap drill, 75% thread
#49
1.854 mm
Clearance hole, normal fit
#41
2.438 mm
Threads per inch
64
0.397 mm pitch
Major diameter
2.184 mm
0.0860 in

Tap drill sizes for #2-64 UNF

Tap drill sizes for #2-64 UNF
Thread engagementDrillDiameter (mm)Diameter (in)Use it for
75% thread#491.854 mm0.0730 inThe usual choice for most materials
50% thread#471.994 mm0.0785 inHard or tough materials: easier tapping, fewer broken taps

No #49 bit to hand? The closest standard bits to 1.854 mm are 1.9 mm (metric) and 5/64" (1.984 mm, fractional inch). A slightly larger bit cuts a shallower thread; a smaller one makes the tap work harder.

Clearance holes for #2 screws

Clearance hole sizes for #2 screws
FitDrillDiameter (mm)Diameter (in)Use it for
Close#432.261 mm0.0890 inAccurate location, well-aligned holes
Normal#412.438 mm0.0960 inGeneral assembly
Loose#372.642 mm0.1040 inSeveral fasteners, or holes that may not line up

#2-64 UNF thread dimensions

#2-64 UNF thread dimensions
DimensionValue
Thread seriesUnified fine thread (UNF)
Major diameter2.184 mm (0.0860 in)
Pitch diameter1.942 mm (0.0765 in)
Minor diameter1.73 mm (0.0681 in)
Pitch0.397 mm (0.0156 in)
Threads per inch64

Head sizes for #2 screws and bolts

Head dimensions for #2 screws and bolts
Head typeHead diameterHead heightAcross flatsDriveStandard
Socket Head Cap Screw3.66 mm2.18 mmn/ahex socket 5/64"ASME B18.3
Hex Head Boltn/a1.65 mm4.76 mmexternal hex 3/16"ASME B18.2.1
Pan Head Screw4.47 mm1.5 mmn/aPhillips PH0ASME B18.6.3
Flat Countersunk Head Screw4.37 mm1.47 mmn/aPhillips PH0ASME B18.6.3 (82 deg)

Questions

What size drill bit do I use for a #2-64 UNF tap?
Use a #49 (1.854 mm) drill for 75% thread, the usual choice. In hard or tough material, a #47 (1.994 mm) drill gives 50% thread and taps more easily.
What is the clearance hole for a #2 screw?
Drill #41 (2.438 mm) for a normal fit. Use #43 (2.261 mm) for a close fit, or #37 (2.642 mm) for a loose fit that forgives misaligned holes.
How many threads per inch does #2-64 UNF have?
64 threads per inch, which is a pitch of 0.397 mm. It is the fine (UNF) thread for #2; the coarse thread is #2-56 UNC.
What size spanner and hex key fit a #2 bolt?
A #2 hex head bolt takes a 3/16" spanner or socket. A #2 socket head cap screw takes a 5/64" hex key.

Every thread on this site, in your pocket.

Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts

Get Nuts & Bolts on Google Play