M33 × 3.5 tap drill size and clearance hole
To tap M33 × 3.5, drill 29.5 mm (1.1614 in) for 75% thread. For a screw to pass through, drill a 36.0 mm (1.4173 in) clearance hole. M33 × 3.5 is an ISO metric coarse thread with a 33.0 mm major diameter and a 3.5 mm pitch.
- Tap drill, 75% thread
- 29.5 mm
- 1.1614 in
- Clearance hole, normal fit
- 36.0 mm
- 1.4173 in
- Pitch
- 3.5 mm
- coarse pitch
- Major diameter
- 33.0 mm
- 1.2992 in
Tap drill sizes for M33 × 3.5
| Thread engagement | Drill | Diameter (in) | Use it for |
|---|---|---|---|
| 75% thread | 29.5 mm | 1.1614 in | The usual choice for most materials |
| 50% thread | 31.25 mm | 1.2303 in | Hard or tough materials: easier tapping, fewer broken taps |
Clearance holes for M33 screws
| Fit | Drill | Diameter (in) | Use it for |
|---|---|---|---|
| Close | 34.0 mm | 1.3386 in | Accurate location, well-aligned holes |
| Normal | 36.0 mm | 1.4173 in | General assembly |
| Loose | 38.0 mm | 1.4961 in | Several fasteners, or holes that may not line up |
M33 × 3.5 thread dimensions
| Dimension | Value |
|---|---|
| Thread series | ISO metric coarse thread |
| Major diameter | 33.0 mm |
| Pitch diameter | 30.727 mm |
| Minor diameter | 28.706 mm |
| Pitch | 3.5 mm |
Head sizes for M33 screws and bolts
| Head type | Head diameter | Head height | Across flats | Drive | Standard |
|---|---|---|---|---|---|
| Socket Head Cap Screw | 50.0 mm | 33.0 mm | n/a | hex socket 24.0 | DIN 912, ISO 4762 |
| Hex Head Bolt | n/a | 21.0 mm | 50.0 mm | external hex 50 | DIN 933, ISO 4017 (full thread), DIN 931, ISO 4014 (partial thread) |
Questions
- What size drill bit do I use for an M33 × 3.5 tap?
- Use a 29.5 mm (1.1614 in) drill for 75% thread, the usual choice. In hard or tough material, a 31.25 mm (1.2303 in) drill gives 50% thread and taps more easily.
- What is the clearance hole for an M33 screw?
- Drill 36.0 mm (1.4173 in) for a normal fit. Use 34.0 mm (1.3386 in) for a close fit, or 38.0 mm (1.4961 in) for a loose fit that forgives misaligned holes.
- What is the pitch of M33 × 3.5?
- M33 × 3.5 has a 3.5 mm pitch, measured from one thread crest to the next. It is the coarse pitch for M33; the fine pitch is M33 × 2.0.
- What size spanner and hex key fit an M33 bolt?
- An M33 hex head bolt takes a 50 mm spanner or socket. An M33 socket head cap screw takes a 24.0 mm hex key.
Every thread on this site, in your pocket.
Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts