5/16"-18 UNC tap drill size and clearance hole
To tap 5/16"-18 UNC, drill letter F (6.528 mm) for 75% thread. For a screw to pass through, drill a letter S (8.839 mm) clearance hole. 5/16"-18 UNC is a unified coarse thread (UNC) with a 7.938 mm (0.3125 in) major diameter and a 1.411 mm pitch (18 threads per inch).
- Tap drill, 75% thread
- letter F
- 6.528 mm
- Clearance hole, normal fit
- letter S
- 8.839 mm
- Threads per inch
- 18
- 1.411 mm pitch
- Major diameter
- 7.938 mm
- 0.3125 in
Tap drill sizes for 5/16"-18 UNC
| Thread engagement | Drill | Diameter (mm) | Diameter (in) | Use it for |
|---|---|---|---|---|
| 75% thread | letter F | 6.528 mm | 0.2570 in | The usual choice for most materials |
| 50% thread | letter L | 7.366 mm | 0.2900 in | Hard or tough materials: easier tapping, fewer broken taps |
No letter F bit to hand? The closest standard bits to 6.528 mm are 6.5 mm (metric) and 1/4" (6.35 mm, fractional inch). A slightly larger bit cuts a shallower thread; a smaller one makes the tap work harder.
Clearance holes for 5/16" screws
| Fit | Drill | Diameter (mm) | Diameter (in) | Use it for |
|---|---|---|---|---|
| Close | letter Q | 8.433 mm | 0.3320 in | Accurate location, well-aligned holes |
| Normal | letter S | 8.839 mm | 0.3480 in | General assembly |
| Loose | 23/64" | 9.128 mm | 0.3594 in | Several fasteners, or holes that may not line up |
5/16"-18 UNC thread dimensions
| Dimension | Value |
|---|---|
| Thread series | Unified coarse thread (UNC) |
| Major diameter | 7.938 mm (0.3125 in) |
| Pitch diameter | 7.095 mm (0.2793 in) |
| Minor diameter | 6.34 mm (0.2496 in) |
| Pitch | 1.411 mm (0.0556 in) |
| Threads per inch | 18 |
Head sizes for 5/16" screws and bolts
| Head type | Head diameter | Head height | Across flats | Drive | Standard |
|---|---|---|---|---|---|
| Socket Head Cap Screw | 11.91 mm | 7.94 mm | n/a | hex socket 1/4" | ASME B18.3 |
| Hex Head Bolt | n/a | 5.97 mm | 12.7 mm | external hex 1/2" | ASME B18.2.1 |
| Pan Head Screw | 15.49 mm | 5.33 mm | n/a | Phillips PH3 | ASME B18.6.3 |
| Flat Countersunk Head Screw | 15.88 mm | 4.83 mm | n/a | Phillips PH3 | ASME B18.6.3 (82 deg) |
Questions
- What size drill bit do I use for a 5/16"-18 UNC tap?
- Use a letter F (6.528 mm) drill for 75% thread, the usual choice. In hard or tough material, a letter L (7.366 mm) drill gives 50% thread and taps more easily.
- What is the clearance hole for a 5/16" screw?
- Drill letter S (8.839 mm) for a normal fit. Use letter Q (8.433 mm) for a close fit, or 23/64" (9.128 mm) for a loose fit that forgives misaligned holes.
- How many threads per inch does 5/16"-18 UNC have?
- 18 threads per inch, which is a pitch of 1.411 mm. It is the coarse (UNC) thread for 5/16"; the fine thread is 5/16"-24 UNF.
- What size spanner and hex key fit a 5/16" bolt?
- A 5/16" hex head bolt takes a 1/2" spanner or socket. A 5/16" socket head cap screw takes a 1/4" hex key.
Every thread on this site, in your pocket.
Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts