3/8"-16 UNC tap drill size and clearance hole
To tap 3/8"-16 UNC, drill 5/16" (7.938 mm) for 75% thread. For a screw to pass through, drill a 27/64" (10.716 mm) clearance hole. 3/8"-16 UNC is a unified coarse thread (UNC) with a 9.525 mm (0.3750 in) major diameter and a 1.587 mm pitch (16 threads per inch).
- Tap drill, 75% thread
- 5/16"
- 7.938 mm
- Clearance hole, normal fit
- 27/64"
- 10.716 mm
- Threads per inch
- 16
- 1.587 mm pitch
- Major diameter
- 9.525 mm
- 0.3750 in
Tap drill sizes for 3/8"-16 UNC
| Thread engagement | Drill | Diameter (mm) | Diameter (in) | Use it for |
|---|---|---|---|---|
| 75% thread | 5/16" | 7.938 mm | 0.3125 in | The usual choice for most materials |
| 50% thread | letter S | 8.839 mm | 0.3480 in | Hard or tough materials: easier tapping, fewer broken taps |
No 5/16" bit to hand? The closest standard bits to 7.938 mm are 8.0 mm (metric) and Letter O (8.026 mm, letter gauge). A slightly larger bit cuts a shallower thread; a smaller one makes the tap work harder.
Clearance holes for 3/8" screws
| Fit | Drill | Diameter (mm) | Diameter (in) | Use it for |
|---|---|---|---|---|
| Close | letter X | 10.084 mm | 0.3970 in | Accurate location, well-aligned holes |
| Normal | 27/64" | 10.716 mm | 0.4219 in | General assembly |
| Loose | 7/16" | 11.112 mm | 0.4375 in | Several fasteners, or holes that may not line up |
3/8"-16 UNC thread dimensions
| Dimension | Value |
|---|---|
| Thread series | Unified coarse thread (UNC) |
| Major diameter | 9.525 mm (0.3750 in) |
| Pitch diameter | 8.556 mm (0.3369 in) |
| Minor diameter | 7.688 mm (0.3027 in) |
| Pitch | 1.587 mm (0.0625 in) |
| Threads per inch | 16 |
Head sizes for 3/8" screws and bolts
| Head type | Head diameter | Head height | Across flats | Drive | Standard |
|---|---|---|---|---|---|
| Socket Head Cap Screw | 14.27 mm | 9.53 mm | n/a | hex socket 5/16" | ASME B18.3 |
| Hex Head Bolt | n/a | 6.81 mm | 14.27 mm | external hex 9/16" | ASME B18.2.1 |
| Pan Head Screw | 18.52 mm | 6.22 mm | n/a | Phillips PH4 | ASME B18.6.3 |
| Flat Countersunk Head Screw | 19.05 mm | 5.82 mm | n/a | Phillips PH4 | ASME B18.6.3 (82 deg) |
Questions
- What size drill bit do I use for a 3/8"-16 UNC tap?
- Use a 5/16" (7.938 mm) drill for 75% thread, the usual choice. In hard or tough material, a letter S (8.839 mm) drill gives 50% thread and taps more easily.
- What is the clearance hole for a 3/8" screw?
- Drill 27/64" (10.716 mm) for a normal fit. Use letter X (10.084 mm) for a close fit, or 7/16" (11.112 mm) for a loose fit that forgives misaligned holes.
- How many threads per inch does 3/8"-16 UNC have?
- 16 threads per inch, which is a pitch of 1.587 mm. It is the coarse (UNC) thread for 3/8"; the fine thread is 3/8"-24 UNF.
- What size spanner and hex key fit a 3/8" bolt?
- A 3/8" hex head bolt takes a 9/16" spanner or socket. A 3/8" socket head cap screw takes a 5/16" hex key.
Every thread on this site, in your pocket.
Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts