1/2"-13 UNC tap drill size and clearance hole
To tap 1/2"-13 UNC, drill 27/64" (10.716 mm) for 75% thread. For a screw to pass through, drill a 35/64" (13.891 mm) clearance hole. 1/2"-13 UNC is a unified coarse thread (UNC) with a 12.7 mm (0.5000 in) major diameter and a 1.954 mm pitch (13 threads per inch).
- Tap drill, 75% thread
- 27/64"
- 10.716 mm
- Clearance hole, normal fit
- 35/64"
- 13.891 mm
- Threads per inch
- 13
- 1.954 mm pitch
- Major diameter
- 12.7 mm
- 0.5000 in
Tap drill sizes for 1/2"-13 UNC
| Thread engagement | Drill | Diameter (mm) | Diameter (in) | Use it for |
|---|---|---|---|---|
| 75% thread | 27/64" | 10.716 mm | 0.4219 in | The usual choice for most materials |
| 50% thread | 29/64" | 11.509 mm | 0.4531 in | Hard or tough materials: easier tapping, fewer broken taps |
Clearance holes for 1/2" screws
| Fit | Drill | Diameter (mm) | Diameter (in) | Use it for |
|---|---|---|---|---|
| Close | 17/32" | 13.494 mm | 0.5313 in | Accurate location, well-aligned holes |
| Normal | 35/64" | 13.891 mm | 0.5469 in | General assembly |
| Loose | 37/64" | 14.684 mm | 0.5781 in | Several fasteners, or holes that may not line up |
1/2"-13 UNC thread dimensions
| Dimension | Value |
|---|---|
| Thread series | Unified coarse thread (UNC) |
| Major diameter | 12.7 mm (0.5000 in) |
| Pitch diameter | 11.508 mm (0.4531 in) |
| Minor diameter | 10.433 mm (0.4107 in) |
| Pitch | 1.954 mm (0.0769 in) |
| Threads per inch | 13 |
Head sizes for 1/2" screws and bolts
| Head type | Head diameter | Head height | Across flats | Drive | Standard |
|---|---|---|---|---|---|
| Socket Head Cap Screw | 19.05 mm | 12.7 mm | n/a | hex socket 3/8" | ASME B18.3 |
| Hex Head Bolt | n/a | 8.2 mm | 19.05 mm | external hex 3/4" | ASME B18.2.1 |
| Pan Head Screw | 24.56 mm | 8.0 mm | n/a | Phillips PH4 | ASME B18.6.3 |
| Flat Countersunk Head Screw | 25.4 mm | 7.62 mm | n/a | Phillips PH4 | ASME B18.6.3 (82 deg) |
Questions
- What size drill bit do I use for a 1/2"-13 UNC tap?
- Use a 27/64" (10.716 mm) drill for 75% thread, the usual choice. In hard or tough material, a 29/64" (11.509 mm) drill gives 50% thread and taps more easily.
- What is the clearance hole for a 1/2" screw?
- Drill 35/64" (13.891 mm) for a normal fit. Use 17/32" (13.494 mm) for a close fit, or 37/64" (14.684 mm) for a loose fit that forgives misaligned holes.
- How many threads per inch does 1/2"-13 UNC have?
- 13 threads per inch, which is a pitch of 1.954 mm. It is the coarse (UNC) thread for 1/2"; the fine thread is 1/2"-20 UNF.
- What size spanner and hex key fit a 1/2" bolt?
- A 1/2" hex head bolt takes a 3/4" spanner or socket. A 1/2" socket head cap screw takes a 3/8" hex key.
Every thread on this site, in your pocket.
Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts