Skip to content

M36 × 4.0 tap drill size and clearance hole

To tap M36 × 4.0, drill 32.0 mm (1.2598 in) for 75% thread. For a screw to pass through, drill a 39.0 mm (1.5354 in) clearance hole. M36 × 4.0 is an ISO metric coarse thread with a 36.0 mm major diameter and a 4.0 mm pitch.

Tap drill, 75% thread
32.0 mm
1.2598 in
Clearance hole, normal fit
39.0 mm
1.5354 in
Pitch
4.0 mm
coarse pitch
Major diameter
36.0 mm
1.4173 in

Tap drill sizes for M36 × 4.0

Tap drill sizes for M36 × 4.0
Thread engagementDrillDiameter (in)Use it for
75% thread32.0 mm1.2598 inThe usual choice for most materials
50% thread34.0 mm1.3386 inHard or tough materials: easier tapping, fewer broken taps

Clearance holes for M36 screws

Clearance hole sizes for M36 screws
FitDrillDiameter (in)Use it for
Close37.0 mm1.4567 inAccurate location, well-aligned holes
Normal39.0 mm1.5354 inGeneral assembly
Loose42.0 mm1.6535 inSeveral fasteners, or holes that may not line up

M36 × 4.0 thread dimensions

M36 × 4.0 thread dimensions
DimensionValue
Thread seriesISO metric coarse thread
Major diameter36.0 mm
Pitch diameter33.402 mm
Minor diameter31.093 mm
Pitch4.0 mm

Head sizes for M36 screws and bolts

Head dimensions for M36 screws and bolts
Head typeHead diameterHead heightAcross flatsDriveStandard
Socket Head Cap Screw54.0 mm36.0 mmn/ahex socket 27.0DIN 912, ISO 4762
Hex Head Boltn/a22.5 mm55.0 mmexternal hex 55DIN 933, ISO 4017 (full thread), DIN 931, ISO 4014 (partial thread)

Questions

What size drill bit do I use for an M36 × 4.0 tap?
Use a 32.0 mm (1.2598 in) drill for 75% thread, the usual choice. In hard or tough material, a 34.0 mm (1.3386 in) drill gives 50% thread and taps more easily.
What is the clearance hole for an M36 screw?
Drill 39.0 mm (1.5354 in) for a normal fit. Use 37.0 mm (1.4567 in) for a close fit, or 42.0 mm (1.6535 in) for a loose fit that forgives misaligned holes.
What is the pitch of M36 × 4.0?
M36 × 4.0 has a 4.0 mm pitch, measured from one thread crest to the next. It is the coarse pitch for M36; the fine pitch is M36 × 3.0.
What size spanner and hex key fit an M36 bolt?
An M36 hex head bolt takes a 55 mm spanner or socket. An M36 socket head cap screw takes a 27.0 mm hex key.

Every thread on this site, in your pocket.

Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts

Get Nuts & Bolts on Google Play