Skip to content

M24 × 2.0 tap drill size and clearance hole

To tap M24 × 2.0, drill 22.0 mm (0.8661 in) for 75% thread. For a screw to pass through, drill a 26.0 mm (1.0236 in) clearance hole. M24 × 2.0 is an ISO metric fine thread with a 24.0 mm major diameter and a 2.0 mm pitch.

Tap drill, 75% thread
22.0 mm
0.8661 in
Clearance hole, normal fit
26.0 mm
1.0236 in
Pitch
2.0 mm
fine pitch
Major diameter
24.0 mm
0.9449 in

Tap drill sizes for M24 × 2.0

Tap drill sizes for M24 × 2.0
Thread engagementDrillDiameter (in)Use it for
75% thread22.0 mm0.8661 inThe usual choice for most materials
50% thread23.0 mm0.9055 inHard or tough materials: easier tapping, fewer broken taps

No 22.0 mm bit to hand? The closest standard bits to 22.0 mm are 55/64" (21.828 mm, fractional inch). A slightly larger bit cuts a shallower thread; a smaller one makes the tap work harder.

Clearance holes for M24 screws

Clearance hole sizes for M24 screws
FitDrillDiameter (in)Use it for
Close25.0 mm0.9843 inAccurate location, well-aligned holes
Normal26.0 mm1.0236 inGeneral assembly
Loose28.0 mm1.1024 inSeveral fasteners, or holes that may not line up

M24 × 2.0 thread dimensions

M24 × 2.0 thread dimensions
DimensionValue
Thread seriesISO metric fine thread
Major diameter24.0 mm
Pitch diameter22.701 mm
Minor diameter21.546 mm
Pitch2.0 mm

Head sizes for M24 screws and bolts

Head dimensions for M24 screws and bolts
Head typeHead diameterHead heightAcross flatsDriveStandard
Socket Head Cap Screw36.0 mm24.0 mmn/ahex socket 19.0DIN 912, ISO 4762
Hex Head Boltn/a15.0 mm36.0 mmexternal hex 36DIN 933, ISO 4017 (full thread), DIN 931, ISO 4014 (partial thread)

Questions

What size drill bit do I use for an M24 × 2.0 tap?
Use a 22.0 mm (0.8661 in) drill for 75% thread, the usual choice. In hard or tough material, a 23.0 mm (0.9055 in) drill gives 50% thread and taps more easily.
What is the clearance hole for an M24 screw?
Drill 26.0 mm (1.0236 in) for a normal fit. Use 25.0 mm (0.9843 in) for a close fit, or 28.0 mm (1.1024 in) for a loose fit that forgives misaligned holes.
What is the pitch of M24 × 2.0?
M24 × 2.0 has a 2.0 mm pitch, measured from one thread crest to the next. It is the fine pitch for M24; the coarse pitch is M24 × 3.0.
What size spanner and hex key fit an M24 bolt?
An M24 hex head bolt takes a 36 mm spanner or socket. An M24 socket head cap screw takes a 19.0 mm hex key.

Every thread on this site, in your pocket.

Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts

Get Nuts & Bolts on Google Play