Skip to content

1/2"-20 UNF tap drill size and clearance hole

To tap 1/2"-20 UNF, drill 29/64" (11.509 mm) for 75% thread. For a screw to pass through, drill a 35/64" (13.891 mm) clearance hole. 1/2"-20 UNF is a unified fine thread (UNF) with a 12.7 mm (0.5000 in) major diameter and a 1.27 mm pitch (20 threads per inch).

Tap drill, 75% thread
29/64"
11.509 mm
Clearance hole, normal fit
35/64"
13.891 mm
Threads per inch
20
1.27 mm pitch
Major diameter
12.7 mm
0.5000 in

Tap drill sizes for 1/2"-20 UNF

Tap drill sizes for 1/2"-20 UNF
Thread engagementDrillDiameter (mm)Diameter (in)Use it for
75% thread29/64"11.509 mm0.4531 inThe usual choice for most materials
50% thread15/32"11.906 mm0.4687 inHard or tough materials: easier tapping, fewer broken taps

No 29/64" bit to hand? The closest standard bits to 11.509 mm are 11.5 mm (metric). A slightly larger bit cuts a shallower thread; a smaller one makes the tap work harder.

Clearance holes for 1/2" screws

Clearance hole sizes for 1/2" screws
FitDrillDiameter (mm)Diameter (in)Use it for
Close17/32"13.494 mm0.5313 inAccurate location, well-aligned holes
Normal35/64"13.891 mm0.5469 inGeneral assembly
Loose37/64"14.684 mm0.5781 inSeveral fasteners, or holes that may not line up

1/2"-20 UNF thread dimensions

1/2"-20 UNF thread dimensions
DimensionValue
Thread seriesUnified fine thread (UNF)
Major diameter12.7 mm (0.5000 in)
Pitch diameter11.875 mm (0.4675 in)
Minor diameter11.138 mm (0.4385 in)
Pitch1.27 mm (0.0500 in)
Threads per inch20

Head sizes for 1/2" screws and bolts

Head dimensions for 1/2" screws and bolts
Head typeHead diameterHead heightAcross flatsDriveStandard
Socket Head Cap Screw19.05 mm12.7 mmn/ahex socket 3/8"ASME B18.3
Hex Head Boltn/a8.2 mm19.05 mmexternal hex 3/4"ASME B18.2.1
Pan Head Screw24.56 mm8.0 mmn/aPhillips PH4ASME B18.6.3
Flat Countersunk Head Screw25.4 mm7.62 mmn/aPhillips PH4ASME B18.6.3 (82 deg)

Questions

What size drill bit do I use for a 1/2"-20 UNF tap?
Use a 29/64" (11.509 mm) drill for 75% thread, the usual choice. In hard or tough material, a 15/32" (11.906 mm) drill gives 50% thread and taps more easily.
What is the clearance hole for a 1/2" screw?
Drill 35/64" (13.891 mm) for a normal fit. Use 17/32" (13.494 mm) for a close fit, or 37/64" (14.684 mm) for a loose fit that forgives misaligned holes.
How many threads per inch does 1/2"-20 UNF have?
20 threads per inch, which is a pitch of 1.27 mm. It is the fine (UNF) thread for 1/2"; the coarse thread is 1/2"-13 UNC.
What size spanner and hex key fit a 1/2" bolt?
A 1/2" hex head bolt takes a 3/4" spanner or socket. A 1/2" socket head cap screw takes a 3/8" hex key.

Every thread on this site, in your pocket.

Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts

Get Nuts & Bolts on Google Play