Skip to content

5/16"-24 UNF tap drill size and clearance hole

To tap 5/16"-24 UNF, drill letter I (6.909 mm) for 75% thread. For a screw to pass through, drill a letter S (8.839 mm) clearance hole. 5/16"-24 UNF is a unified fine thread (UNF) with a 7.938 mm (0.3125 in) major diameter and a 1.058 mm pitch (24 threads per inch).

Tap drill, 75% thread
letter I
6.909 mm
Clearance hole, normal fit
letter S
8.839 mm
Threads per inch
24
1.058 mm pitch
Major diameter
7.938 mm
0.3125 in

Tap drill sizes for 5/16"-24 UNF

Tap drill sizes for 5/16"-24 UNF
Thread engagementDrillDiameter (mm)Diameter (in)Use it for
75% threadletter I6.909 mm0.2720 inThe usual choice for most materials
50% threadletter L7.366 mm0.2900 inHard or tough materials: easier tapping, fewer broken taps

No letter I bit to hand? The closest standard bits to 6.909 mm are 7.0 mm (metric) and 17/64" (6.747 mm, fractional inch). A slightly larger bit cuts a shallower thread; a smaller one makes the tap work harder.

Clearance holes for 5/16" screws

Clearance hole sizes for 5/16" screws
FitDrillDiameter (mm)Diameter (in)Use it for
Closeletter Q8.433 mm0.3320 inAccurate location, well-aligned holes
Normalletter S8.839 mm0.3480 inGeneral assembly
Loose23/64"9.128 mm0.3594 inSeveral fasteners, or holes that may not line up

5/16"-24 UNF thread dimensions

5/16"-24 UNF thread dimensions
DimensionValue
Thread seriesUnified fine thread (UNF)
Major diameter7.938 mm (0.3125 in)
Pitch diameter7.249 mm (0.2854 in)
Minor diameter6.639 mm (0.2614 in)
Pitch1.058 mm (0.0417 in)
Threads per inch24

Head sizes for 5/16" screws and bolts

Head dimensions for 5/16" screws and bolts
Head typeHead diameterHead heightAcross flatsDriveStandard
Socket Head Cap Screw11.91 mm7.94 mmn/ahex socket 1/4"ASME B18.3
Hex Head Boltn/a5.97 mm12.7 mmexternal hex 1/2"ASME B18.2.1
Pan Head Screw15.49 mm5.33 mmn/aPhillips PH3ASME B18.6.3
Flat Countersunk Head Screw15.88 mm4.83 mmn/aPhillips PH3ASME B18.6.3 (82 deg)

Questions

What size drill bit do I use for a 5/16"-24 UNF tap?
Use a letter I (6.909 mm) drill for 75% thread, the usual choice. In hard or tough material, a letter L (7.366 mm) drill gives 50% thread and taps more easily.
What is the clearance hole for a 5/16" screw?
Drill letter S (8.839 mm) for a normal fit. Use letter Q (8.433 mm) for a close fit, or 23/64" (9.128 mm) for a loose fit that forgives misaligned holes.
How many threads per inch does 5/16"-24 UNF have?
24 threads per inch, which is a pitch of 1.058 mm. It is the fine (UNF) thread for 5/16"; the coarse thread is 5/16"-18 UNC.
What size spanner and hex key fit a 5/16" bolt?
A 5/16" hex head bolt takes a 1/2" spanner or socket. A 5/16" socket head cap screw takes a 1/4" hex key.

Every thread on this site, in your pocket.

Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts

Get Nuts & Bolts on Google Play