#6-32 UNC tap drill size and clearance hole
To tap #6-32 UNC, drill #36 (2.705 mm) for 75% thread. For a screw to pass through, drill a #24 (3.861 mm) clearance hole. #6-32 UNC is a unified coarse thread (UNC) with a 3.505 mm (0.1380 in) major diameter and a 0.794 mm pitch (32 threads per inch).
- Tap drill, 75% thread
- #36
- 2.705 mm
- Clearance hole, normal fit
- #24
- 3.861 mm
- Threads per inch
- 32
- 0.794 mm pitch
- Major diameter
- 3.505 mm
- 0.1380 in
Tap drill sizes for #6-32 UNC
| Thread engagement | Drill | Diameter (mm) | Diameter (in) | Use it for |
|---|---|---|---|---|
| 75% thread | #36 | 2.705 mm | 0.1065 in | The usual choice for most materials |
| 50% thread | #31 | 3.048 mm | 0.1200 in | Hard or tough materials: easier tapping, fewer broken taps |
No #36 bit to hand? The closest standard bits to 2.705 mm are 2.7 mm (metric) and 7/64" (2.778 mm, fractional inch). A slightly larger bit cuts a shallower thread; a smaller one makes the tap work harder.
Clearance holes for #6 screws
| Fit | Drill | Diameter (mm) | Diameter (in) | Use it for |
|---|---|---|---|---|
| Close | #27 | 3.658 mm | 0.1440 in | Accurate location, well-aligned holes |
| Normal | #24 | 3.861 mm | 0.1520 in | General assembly |
| Loose | #20 | 4.089 mm | 0.1610 in | Several fasteners, or holes that may not line up |
#6-32 UNC thread dimensions
| Dimension | Value |
|---|---|
| Thread series | Unified coarse thread (UNC) |
| Major diameter | 3.505 mm (0.1380 in) |
| Pitch diameter | 2.99 mm (0.1177 in) |
| Minor diameter | 2.532 mm (0.0997 in) |
| Pitch | 0.794 mm (0.0313 in) |
| Threads per inch | 32 |
Head sizes for #6 screws and bolts
| Head type | Head diameter | Head height | Across flats | Drive | Standard |
|---|---|---|---|---|---|
| Socket Head Cap Screw | 5.74 mm | 3.51 mm | n/a | hex socket 7/64" | ASME B18.3 |
| Hex Head Bolt | n/a | 2.79 mm | 7.94 mm | external hex 5/16" | ASME B18.2.1 |
| Pan Head Screw | 6.86 mm | 2.46 mm | n/a | Phillips PH1 | ASME B18.6.3 |
| Flat Countersunk Head Screw | 7.09 mm | 2.18 mm | n/a | Phillips PH1 | ASME B18.6.3 (82 deg) |
Questions
- What size drill bit do I use for a #6-32 UNC tap?
- Use a #36 (2.705 mm) drill for 75% thread, the usual choice. In hard or tough material, a #31 (3.048 mm) drill gives 50% thread and taps more easily.
- What is the clearance hole for a #6 screw?
- Drill #24 (3.861 mm) for a normal fit. Use #27 (3.658 mm) for a close fit, or #20 (4.089 mm) for a loose fit that forgives misaligned holes.
- How many threads per inch does #6-32 UNC have?
- 32 threads per inch, which is a pitch of 0.794 mm. It is the coarse (UNC) thread for #6; the fine thread is #6-40 UNF.
- What size spanner and hex key fit a #6 bolt?
- A #6 hex head bolt takes a 5/16" spanner or socket. A #6 socket head cap screw takes a 7/64" hex key.
Every thread on this site, in your pocket.
Screw sizes, tap drills and clearance holes for the workshop, offline. About Nuts & Bolts