HeatTreat.Steel heat treatment calculator with sources
HeatTreat computes the numbers you need to heat treat steel and shows where every one came from. Pick one of 32 grades or enter your own composition to get critical temperatures, retained austenite, tempering equivalence and carbon equivalents. Each result carries its equation, the paper behind it and the range it was fitted on. These are engineering estimates, not specifications.
What it does
Critical temperatures
Calculates Ac1 and Ac3 from Andrews 1965, plus Ms and Bs, with three published Ms fits shown side by side.
Retained austenite
Estimates retained austenite after quenching, with room, freezer, dry ice and liquid nitrogen quench-finish presets.
Tempering equivalence
Uses Hollomon and Jaffe 1945 to trade tempering time against temperature, with the embrittlement-window caveat shown.
32 steel grades
Carbon, alloy, tool and martensitic stainless grades, searchable across AISI, EN/DIN, JIS and old British designations.
Range checks
Each result is checked against the range its correlation was fitted on, and withheld when your chemistry falls outside it.
Shop reference
Forge glow colours, temper oxide colours and Grossmann quench severity for common media, in Celsius or Fahrenheit.
Who it's for
- Knife makers and blacksmiths planning a hardening and tempering cycle
- Heat treat shops that want a quick cross-check with a citation
- Students and engineers learning the published correlations for steel
Your data
There is no account or sign-up. Every calculation runs on your device, so it works on the shop floor or in a lab with no signal.
Questions
- How do I find the austenitising temperature for a steel like 1084 or O1?
- Open the grade page in HeatTreat. It shows typical published practice, including the austenitising band, quench medium, temper range and expected hardness, and links straight into the calculator. Verify against your supplier's data.
- How much retained austenite is left after quenching?
- HeatTreat estimates it with the Koistinen and Marburger 1959 relation, using presets for finishing the quench at room temperature, in a freezer, in dry ice or in liquid nitrogen. Treat the figure as an estimate.
- Are HeatTreat's numbers accurate enough to commit work to?
- They are engineering estimates from published empirical correlations, and correlations carry scatter. Verify against the applicable standard, your supplier's data and your own test coupons before committing work.
- Why does HeatTreat not give Ac3 for some steels?
- The app withholds Ac3 for hypereutectoid steels, and its low-alloy correlations refuse tool steel and stainless chemistry. It does this because those compositions sit outside what the equations were fitted to cover.
Free reference from HeatTreat
More learning & tools from Futigo
- Nuts & BoltsScrew sizes, tap drills and clearance holes for the workshop, offline.
- SureCheckTake a quick photo as proof, so you stop second-guessing yourself.
- AI Visibility PulseCheck whether your website is ready for AI search.
- EllinghamAn interactive Ellingham diagram, computed live from NIST data.
- FocusMathSolve maths puzzles to earn your screen time.
- HEAAn offline alloy tool for materials researchers, students and designers.
Heat treatment numbers for common steels, each traced to its source paper.
Get HeatTreat on Google Play