Skip to content

FeO formation: Gibbs free energy by temperature

For 2 Fe + O₂ → 2 FeO, the standard Gibbs energy is -413.2 kJ per mole of O₂ at 1000 K (727 °C), or -206.6 kJ per mole of FeO. The table below runs from 298 K (25 °C) to 3000 K (2727 °C), computed from NIST Shomate data.

ΔG° at 1000 K
-413.2 kJ
per mole O₂
ΔH° at 1000 K
-537.3 kJ
per mole O₂
ΔS° at 1000 K
-124.1 J/K
per mole O₂
Data range
298 to 3133 K
25 to 2860 °C

FeO on the Ellingham diagram

0-200-400-600-800-1000-1200500 K227 °C1000 K727 °C1500 K1227 °C2000 K1727 °C2500 K2227 °CΔG° (kJ per mole O₂)COC→CO₂CO→CO₂H₂OFeOAl₂O₃MgOSiO₂TiO₂Cr₂O₃Cu₂OCuO
Ellingham line for 2 Fe + O₂ → 2 FeO. Each line is the standard Gibbs energy of one oxidation reaction per mole of O₂. A lower line means a more stable oxide. Lines stop where the tabulated data stop.

The line changes slope where a reactant or product changes phase: Fe goes from alpha to delta at 1100 K (827 °C); Fe goes from delta to liquid at 1809 K (1536 °C); FeO goes from solid to liquid at 1650 K (1377 °C).

ΔG°, ΔH° and ΔS° for 2 Fe + O₂ → 2 FeO

Standard thermochemistry of 2 Fe + O₂ → 2 FeO by temperature
T (K)T (°C)ΔG° (kJ/mol O₂)ΔG°f (kJ/mol FeO)ΔH° (kJ/mol O₂)ΔS° (J/K/mol O₂)log₁₀ pO₂ (bar)
30027-502.6-251.3-544.0-138.2-87.5
400127-489.1-244.5-542.1-132.5-63.9
500227-476.0-238.0-540.3-128.6-49.7
600327-463.3-231.7-538.8-125.8-40.3
700427-450.8-225.4-537.6-124.0-33.6
800527-437.9-218.9-536.3-123.1-28.6
900627-425.6-212.8-536.6-123.4-24.7
1000727-413.2-206.6-537.3-124.1-21.6
1100827-401.3-200.7-541.5-127.4-19.1
1200927-388.7-194.3-540.8-126.8-16.9
13001027-376.0-188.0-540.0-126.1-15.1
14001127-363.4-181.7-538.8-125.3-13.6
15001227-350.9-175.5-537.6-124.5-12.2
16001327-338.5-169.3-536.5-123.7-11.1
17001427-327.7-163.8-487.0-93.8-10.1
18001527-318.3-159.2-485.5-92.9-9.2
19001627-307.7-153.8-512.4-107.8-8.5
20001727-296.9-148.4-511.7-107.4-7.8
21001827-286.2-143.1-511.1-107.1-7.1
22001927-275.5-137.7-510.4-106.8-6.5
23002027-264.8-132.4-509.8-106.5-6.0
24002127-254.2-127.1-509.3-106.3-5.5
25002227-243.5-121.8-508.7-106.1-5.1
26002327-233.0-116.5-508.2-105.8-4.7
27002427-222.4-111.2-507.6-105.7-4.3
28002527-211.8-105.9-507.1-105.5-4.0
29002627-201.3-100.6-506.7-105.3-3.6
30002727-190.8-95.4-506.2-105.1-3.3

Standard state: pure solids and liquids, gases at 1 bar. pO₂ is the oxygen pressure at which Fe and FeO are in balance; below it the oxide gives up its oxygen. ΔG° = ΔH° − TΔS°. Values are computed only inside the range every species is tabulated for.

Below about 843 K (570 °C) FeO (wüstite) is not the stable oxide of iron: it breaks down to iron and magnetite, Fe₃O₄. The FeO line is drawn there as the data tabulate it, so treat low-temperature FeO answers as a guide only. The data also describe stoichiometric FeO, while real wüstite is iron-deficient (about Fe₀.₉₅O), so measured values differ by a few per cent.

FeO against the other lines

Which element reduces which oxide, comparing FeO with each other line
Other reactionResult at standard conditionsShared data range
2 C + O₂ → 2 COCarbon reduces FeO above 1045 K (771 °C)298 to 2000 K
C + O₂ → CO₂Carbon reduces FeO above 1142 K (869 °C)298 to 2000 K
2 CO + O₂ → 2 CO₂Iron reduces CO₂ above 561 K (288 °C)298 to 3133 K
2 H₂ + O₂ → 2 H₂OIron reduces H₂O at every temperature in the shared range500 to 3133 K
4/3 Al + O₂ → 2/3 Al₂O₃Aluminium reduces FeO at every temperature in the shared range298 to 2791 K
2 Mg + O₂ → 2 MgOMagnesium reduces FeO at every temperature in the shared range298 to 1366 K
Si + O₂ → SiO₂Silicon reduces FeO at every temperature in the shared range298 to 1996 K
Ti + O₂ → TiO₂Titanium reduces FeO at every temperature in the shared range298 to 2000 K
4/3 Cr + O₂ → 2/3 Cr₂O₃Chromium reduces FeO at every temperature in the shared range305 to 2952 K
4 Cu + O₂ → 2 Cu₂OIron reduces Cu₂O at every temperature in the shared range298 to 2000 K
2 Cu + O₂ → 2 CuOIron reduces CuO at every temperature in the shared range298 to 2000 K

Questions

What is the Gibbs free energy of formation of FeO?
At 1000 K (727 °C) it is -206.6 kJ per mole of FeO (-413.2 kJ per mole of O₂). It changes with temperature; the table gives it every 100 K.
Why does the FeO line slope upwards?
The reaction uses up oxygen gas, so entropy falls: ΔS° is -124.1 J/K per mole of O₂ at 1000 K. The slope of the line is minus ΔS°, so ΔG° rises with temperature.
Where do these FeO numbers come from?
They are computed from Shomate coefficients in the NIST Chemistry WebBook: Fe (C7439896), O₂ (C7782447), FeO (C1345251). Nothing is extrapolated beyond the tabulated range.

Any temperature, any reaction, with the source for every number.

An interactive Ellingham diagram, computed live from NIST data. About Ellingham

Get Ellingham on Google Play